Mature

CAM204

The CAM204 is a multi channel processor IC for resonant inductive position sensing. It can measure up to four sensors and reports results to a host over an SPI interface.

Overview

The CAM204 is a multi channel processor IC for resonant inductive position sensing.  It can measure up to four sensors and reports results to a host over an SPI interface.

The CAM622 is recommended for new designs.  However the CAM204 remains a cost effective processor for multi-axis sensing, including up to 4 basic sensors, which can be any combination of Basic Rotary or Basic Linear Sensors.

Features

  • Resonant inductive position sensing engine
  • Fully ratiometric measurements
  • SPI communications (slave device)
  • User IOs for position triggers and sample indicators
  • Can process multiple sensors for centralised processing…
    • Up to 4 Type 1 sensors
    • Up to 2 Type 6 sensors
  • Can drive external DAC for up to 4 analog outputs
  • Internal software upgradable over SPI

Performance

  • Noise Free Resolution 10…16 bits at typical gap, depending on sensor
  • Automatic tuning to resonators across ±7% frequency range
  • Extremely stable across temperature: < ±0.1% position change across temperature for Type 1 sensors; < ±0.01% for Type 2 and 6
  • Update rate > 1000 samples/s
  • Single 2.7...3.6V supply
  • -40°C to +125°C 28-pin SSOP (CAM204BE)
  • -40°C to +85°C 28-pin QFN (CAM204MI)

Downloads

  • Datasheets CAM204 CTU Datasheet Mature PDF · 1.34 MB
  • Datasheets Type 1 CAM204 CTU Development Board Datasheet PDF · 502 KB
  • Datasheets Type3&4 CAM204 CTU Development Board Datasheet PDF · 278 KB
  • Datasheets Type6 CAM204 CTU Development Board Datasheet PDF · 325 KB
View all resources

Registered users get access to the full download library, including CTU Software and sensor blueprints.

Order

CAM204

Buy Now

Related products for CAM204

All products

Precision Linear Sensors

Precision linear sensors offer performance improvements over basic linear sensors. They do this with an additional "fine" set of sensor coils. This fine track delivers high precision and accuracy, while a coarse track delivers an absolute output.

Read more Precision Linear Sensors

Precision rotary sensors

This range of rotary sensors is for precision angle measurement over a full 360° of rotation. Sensors and targets both include large central holes that allow a shaft to pass through them, and have a balanced design for immunity to misalignment.

Read more Precision rotary sensors

Basic Linear Sensors

Basic linear sensors are robust and simple. Standard designs are available from 25mm to 300mm measuring length.

Read more Basic Linear Sensors

Solutions for Innovators

Register to download software tools or get advice directly from CambridgeIC’s engineers