Basic Arc Sensors

These CambridgeIC Arc Position Sensors have a measuring range of 100°. They are available with Sensor Radius from 25mm to 100mm.

1 / 2

Overview

These CambridgeIC Arc Position Sensors have a measuring range of 100°. They are available with Sensor Radius from 25mm to 100mm.

The basic arc sensors are Type 4  (find out more about how sensors are classified and what this means for CTU selection in our FAQ). This means that a single CAM312 chip can process two of these arc sensors, one arc and one linear sensor or one arc and one rotary sensor.  For arc sensors compatible with the newer CAM622 please contact us.

This range of sensors is optimised to work with CambridgeIC’s Standard Target. Two mechanical configurations are possible as illustrated below, Target Inside and Target Outside. Either may be used, to deliver the most convenient mechanical integration.

Arc Sensor Standard Target Configurations - Target Inside and Target Outside

Features

  • Full absolute sensing along 100° of arc
  • 4-layer PCB process
  • Target is sensed from FRONT or REAR of sensor
  • Target may be positioned to the inside or outside

Performance

  • Linearity Error <0.4% at 0.5mm…1.5mm Gap, Target Inside
  • Noise Free Resolution > 10.5 bits up to 1.5mm Gap
  • Up to 1mm Radial Misalignment

Applications

  • Intelligent valves
  • Surveillance camera tilt axis angle sensing
  • Motorised antenna position feedback
  • Vent angle sensing
  • Gate opening angle sensing
  • Exercise equipment angle feedback
  • Vehicle suspension level sensing
  • Measurement of handle position
  • Actuator position feedback
  • Optical and magnetic encoder replacement

Testing and development

Part NoDescriptionComments
013-0044R25mm 100° Arc Sensor Assembly25mm Sensor Radius
013-0045R30mm 100° Arc Sensor Assembly30mm Sensor Radius
013-0046R36mm 100° Arc Sensor Assembly36mm Sensor Radius
013-0047R48mm 100° Arc Sensor Assembly48mm Sensor Radius
013-0048R68mm 100° Arc Sensor Assembly68mm Sensor Radius
013-0049R100mm 100° Arc Sensor Assembly100mm Sensor Radius
013-1005Standard TargetCompatible target, best linearity
013-102011mm E-Core TargetAlternative, smaller target
013-60016-way sensor connecting cableConnects from arc sensor to Development Board
013-5034CAM312 Development BoardCompatible Development Board including CAM312 chip.
Can process two sensors. Set Sensor Type to 4.
013-7001CTU AdapterConnects Development Board to a PC running CambridgeIC CTU Software,
to view measurements for demonstration and evaluation.

Downloads

  • Datasheets Basic ArcSensors Datasheet PDF · 1.50 MB
  • CAD Files Arc Sensor CAD files ZIP · 1.35 MB
View all resources

Registered users get access to the full download library, including CTU Software and sensor blueprints.

Order

Basic Arc Sensors

Buy Now

Related products for Basic Arc Sensors

All products

CAM312

The CAM312 is a cost effective processor IC for resonant inductive position sensing. It can connect to and process up to two sensors, and reports results over an SPI interface.

Read more CAM312

CAM312 Development Board

CAM312 Development Board includes a CAM312 chip and the external circuitry required for operating up to two Type 4 sensors, or one Type 2 or Type 6 sensor.

Read more CAM312 Development Board

Connecting Cables

A selection of cable assemblies is available for connecting between assembled sensors and development boards, and for connecting to their SPI interface connector.

Read more Connecting Cables

Solutions for Innovators

Register to download software tools or get advice directly from CambridgeIC’s engineers