
Type B Rotary Targets
Type B Targets work only with the CAM622. They are mounted to a rotating part, and work in combination with matching Type B Rotary Sensors.
Read more Type B Rotary TargetsType B sensors work only with the CAM622. They are for precise absolute angle measurement over a full 360° of rotation. Sensors and targets are both built from PCBs for low cost, robustness and small size.
Type B sensors detect the relative angle of the matching Type B Rotary Targets. Sensors and targets both include large central holes that allow a shaft to pass through them, and have a balanced design for immunity to misalignment.
Sensors include fine coils for precise angle measurement. These repeat 3 or 5 times around a circle (the sensor’s “Subtype”). A “B3” sensor means it is Type B and has a Subtype of 3. Sensors also include coarse coils to establish absolute position.
| Assembled Sensor Part No (rear connector) | Assembled Target Part No | Outside diameter (coil areas only) | Inside diameter (coil areas only) | Typical linearity, 1mm gap, aligned | Noise Free Resolution, 1mm gap, default CAM622 Motion Filter settings | |
|---|---|---|---|---|---|---|
| 25mm B3 | 013-0068 | 013-1037 | 25.0mm | 8.6mm | ±0.05° | 15.8 bits |
| 30mm B3 | 013-0069 | 013-1040 | 30.0mm | 13.6mm | ±0.05° | 16.2 bits |
| 50mm B5 | 013-0065 | 013-1038 | 50.0mm | 31.0mm | ±0.025° | 17.3 bits |
| 108mm B9 | 013-0074 | 013-1045 | 108.0mm | 88.0mm | ±0.02° | 18 bits |
| 180mm B15 | 013-0076 | 013-1046 | 180.0mm | 160.0mm | ±0.01° | 17.4 bits |
Registered users get access to the full download library, including CTU Software and sensor blueprints.

Type B Targets work only with the CAM622. They are mounted to a rotating part, and work in combination with matching Type B Rotary Sensors.
Read more Type B Rotary Targets
CambridgeIC’s CAM622 is a Resonant Inductive Encoder IC. It connects to a host device over SPI, quadrature ABN, BiSS or SENT interfaces.
Read more CAM622The CAM622 MultiComms Board processes a Type B Sensor. It supports multiple host interfaces including SPI, quadrature ABN, BiSS and SENT.
Read more CAM622 MultiComms Board
The CAM622 MultiComms Bundle is a kit of parts to help customers test and evaluate the CAM622. It connects to a customer's choice of Type B Sensor.
Read more CAM622 MultiComms BundleRegister to download software tools or get advice directly from CambridgeIC’s engineers
Log in with the email address and password you registered with.
This resource is available to registered CambridgeIC users.
Register for free access to CTU Software, CAD files and sensor blueprints.
Enter the email address you registered with and we’ll send you a link to reset your password.
If an account exists for that address, you’ll receive a password reset link shortly.
Register your account for complete access to all CambridgeIC resources.
Thank you for creating your account. You will receive an email shortly with your account confirmation. You will now be able to access all of our resources.